IB Sport ScienceAS Level / CambridgeGeneral

Angle of Release

The launch angle that helps decide how far a projectile flies — one of the three factors governing projectile distance.

📖What it means

The angle of release is the angle at which a projectile is launched relative to the horizontal. Along with the speed of release and the height of release, it is one of the three factors that determine the horizontal distance a projectile travels.

For a projectile released and landing at the same height, the theoretically optimal angle for maximum distance is 45 degrees. However, when the release height is above the landing height (as in shot put, where the shot is released above the ground), the optimal angle is slightly less than 45 degrees.

In practice, air resistance and aerodynamic lift further affect the ideal angle — for implements such as the discus and javelin, which generate lift, the optimal release angle differs from the simple projectile prediction.

🏅Sporting examples

Shot put

Because the shot is released above the ground, its optimal release angle is slightly below 45 degrees rather than exactly 45.

Long jump

A long jumper's take-off angle is a compromise, as the very high speeds involved make a true 45-degree angle impractical.

Javelin

The javelin's aerodynamic lift means its optimal release angle differs from the simple 45-degree projectile prediction.

✍️Using the term in context

State the three release factors and the 45-degree qualification:

"The angle of release is one of three factors determining projectile distance, alongside speed and height of release; 45 degrees is optimal when release and landing heights are equal, but a greater release height lowers the optimal angle."

Note that air resistance and lift alter the ideal angle for real implements.

🔗Related terms

🎓Where this appears

← Back to the full A–Z Library

Simply Sport Science is an independent educational resource. It is not affiliated with, endorsed or sponsored by the International Baccalaureate Organization, Cambridge University Press & Assessment or Pearson/BTEC. All course and exam-board names are used only to identify the specifications the materials support.