How forces cause and change movement: the three laws, linear and angular motion, momentum and impulse, and at higher level collisions, friction, work, energy and power.
Every movement in sport follows Newton's three laws. They explain why an athlete needs a force to start moving, how force and mass decide acceleration, and how pushing on the ground moves the body. They apply to linear motion (in a straight line) and angular motion (rotation about an axis). Momentum and impulse link force, time and change of motion, which explains everything from landing safely to hitting a ball further. At higher level, you also study collisions, friction, and work, energy and power.
A force is a push or pull, measured in newtons (N). The net force is the total effect of all the forces on an object. The three laws explain how net force affects motion:
| Quantity | Meaning | Type | Unit |
|---|---|---|---|
| Distance | The total length of the path travelled | Scalar | m |
| Displacement | The straight-line change in position, with direction | Vector | m |
| Speed | Distance ÷ time | Scalar | m/s |
| Velocity | Displacement ÷ time | Vector | m/s |
| Acceleration | Change in velocity ÷ time | Vector | m/s² |
A scalar has size only; a vector has size and direction. A runner who completes one 400 m lap in 50 s has covered a distance of 400 m, but their displacement is 0 m (they finish where they started), so their average speed is 8 m/s and their average velocity is 0 m/s.
Momentum is mass × velocity (p = mv, in kg m/s). To change an object's momentum, a force must act for some time. The product is the impulse:
Impulse = force × time = change in momentum
This explains many sporting techniques. A follow-through in golf, tennis or throwing lengthens the time the force is applied to the ball, which increases the impulse and so the speed of the ball. In the opposite case, when landing, the athlete must lose a fixed amount of momentum. Bending the knees makes the stopping time longer, so the peak force on the bones and joints is lower.
Angular motion is rotation about an axis, such as a somersault (axis through the hips) or a golf swing. The key quantities are angular displacement (the angle turned, in degrees or radians), angular velocity (ω, the angle turned per second) and angular acceleration. Newton's laws have angular versions: a body keeps rotating at constant angular velocity unless an external torque acts, torque produces angular acceleration, and torques come in equal and opposite pairs.
Because angular momentum is conserved in flight, a diver or gymnast can control rotation by changing shape. Tucking pulls mass towards the axis, reducing the moment of inertia, so angular velocity increases and the somersault speeds up. Extending the body before entry or landing increases the moment of inertia and slows the rotation. The angular momentum itself is created at take-off by an eccentric force pushing off the board or ground.
In a collision with no external force, the total momentum before equals the total momentum after (conservation of momentum): m₁v₁ + m₂v₂ = m₁v₁′ + m₂v₂′. In an elastic collision, kinetic energy is also conserved (a bouncing superball); in an inelastic collision some is lost as heat and sound, and the objects may move together (a rugby tackle).
Worked example: a 90 kg runner moving at 6 m/s tackles a stationary 100 kg player, and they move together. Momentum before = 90 × 6 = 540 kg m/s. Momentum after = 190 × v. So v = 540 ÷ 190 = 2.8 m/s.
Friction is a contact force parallel to the surface that opposes motion or attempted motion between two surfaces. Its maximum size depends on the coefficient of friction (μ), which depends on the two surfaces, and on the normal reaction force (N) pressing them together:
Friction = μ × N
For example, if μ = 0.8 and N = 700 N, the maximum friction is 0.8 × 700 = 560 N. Static friction (before sliding) is usually greater than kinetic friction (while sliding). Friction is essential for running, as without it the foot would slip and no forward push could be obtained. Athletes increase friction with studs, spikes and chalk, and reduce it where speed matters, as with skates on ice or waxed skis. A wet surface lowers μ and increases slipping and injury risk.
| Quantity | Equation | Unit | Example |
|---|---|---|---|
| Work | W = F × d (distance moved in the direction of the force) | joule (J) | Lifting 100 kg (about 1000 N) through 0.5 m is 500 J of work |
| Power | P = W ÷ t (or F × v) | watt (W) | 500 J in 2 s is 250 W |
| Kinetic energy | KE = ½ m v² | J | A 70 kg sprinter at 10 m/s has 3500 J |
| Gravitational potential energy | GPE = m g h | J | A 70 kg high jumper raising their centre of mass 1 m gains about 690 J |
Power matters in sport because speed of movement matters as much as force: a weightlifter and a sprinter may both produce large forces, but the one who produces the same work in less time has more power.
Write your answer first, then open the model answer to check it.
Simply Sport Science is an independent educational resource. It is not affiliated with, endorsed or sponsored by the International Baccalaureate Organization, Cambridge University Press & Assessment or Pearson/BTEC. All course and exam-board names are used only to identify the specifications the materials support.